WISP режим (поставщик услуг беспроводного Интернета). Пример использования резервного подключение к смартфону через Wi-Fi

The below are the steps to configure as Static Mode in WISP router.

Edit WWAN interface to get IP address mode option.
Click on interface for static and PPPOE interface.
Choose static if you are using the static IP.
Or choose PPPOE if you are using the PPPOE server.
And then select the static address and give the internet IP address as per your network configuration.
And then click on save and apply changes.

After rebooting the device change your PC/ Laptop LAN to DHCP mode and check the internet connection.

Network - Interfaces - Devices - вибираєш WAN - Configure - і вписуєш потрібний в MAC address

або в конфігу /etc/config/network

<config device
        option name 'wan'
        option macaddr '11:22:33:44:55:66'

- Connect to Router

- Go to IP router (i.e 10.10.10.100)

- Go to Network → Wireless/WiFi

- Scan Wifi (you can use both if your router have dual band support)

- if you first time, you can checklist checkbox for deleting previous wifi config. but if you buy router from me, u can uncheck it.

- Set Mode as Client

- Set Firewall to WAN

- Set Network to WWAN

- Insert password

- Save & Apply CONNECTED!

- Go to Network → Wireless/WiFi

- Add Wifi (you can use both freq 2.4 or 5.8)

- Fill detail on Wireless data (SSID name, Password, etc)

- Set Network to LAN

- Save and Apply